Subscribe: Follow via RSSFollow via TwitterFollow via FacebookFollow via FreiendFFeedFollow via Email

Windows 7 Tip: Click Here to check your PC for Windows Errors

Unlock iPhone 3GS 2G Firmware 3.1.2 on Windows

  ADVERTISEMENTS






  Subscribe Us  Follow us On Twitter
Don't want to miss a single bit? Subscribe to our RSS Feed!

Again so Quickly Dev Team released the new Pwnage tool 3.1.4 to Jailbreak iphone 3GS 3.1.2 on MAC. But again this time it was not available for the Windows. So again we made a iPhone 3GS 3.1.2 Activated Custom Firmware to Jailbreak and Unlock iPhone 3GS 3.1.2. Yes i tried it this on my iPhone 3GS on Windows and it was working so smoothly. But only users with a previously Jailbroken iPhone 3GS should try this tutorial and yes it does not work for those who have an iPhone 3GS with Firmware 3.1 out-of-the-box. So here is the guide:-
If your on baseband 05.11.07 thans read this Unlock iPhone 3.1.2 baseband 05.11.07 with blacksn0w

Download all these 3 Rapidshare Links and Join with them HJsplit and Unzip it on your desktop.

Links for iPhone 2G

iPhone2G-Custom312-Technobuzz.zip.001

iPhone2G-Custom312-Technobuzz.zip.002

iPhone2G-Custom312-Technobuzz.zip.003

Links for iPhone 3GS
iPhone2_1_3.1.2_7D11_Activated_Custom_Restore_Technobuzz_net.ipsw.001

iPhone2_1_3.1.2_7D11_Activated_Custom_Restore_Technobuzz_net.ipsw.002

iPhone2_1_3.1.2_7D11_Activated_Custom_Restore_Technobuzz_net.ipsw.003

After Joining them with HJsplit and savie it on the Desktop do these steps.

1. Download and intsall iTunes 9, and then run it.
.
2. Connect your iPhone 3GS to the Windows PC.
.
3. Click ‘Restore’ while holding SHIFT key and select the Custom IPSW that you saved in your desktop.
.
4. Now sit back and enjoy as iTunes does the rest for you. Once everything is processed and OS boots up, install Ultrasnow, See below how to do that.
.
5. Start “Cydia” on your iPhone and click “Manage” tab on the bottom than “Sourcesas seen in the screenshot below:

cydia-sources

6. Click “Edit” and then on “Add”. Now enter a url source
as seen in
the screenshot below. Type
“http://repo666.ultrasn0w.com” and touch on “Add Source”.

add source

7. Now Cydia will automatically update your sources by following a series of automated steps.

instaal cydia

8. After installation is completed. Search for “ultrasn0w” in Cydia and install it.

1

Thats it! now your
iPhone 3GS
3.1.2  is Jailbreak and Unlock too. Enjoy it, and yes don,t  forget to Subscribe us
feed Here and Follow us on twitter too.

Blog Widget by LinkWithin




If you liked this post: Subscribe by Twitter Follow me on Twitter   or   Subscribe by RSS Subscribe via RSS   or   

Related Articles:


Leave a Comment

53 Responses to “Unlock iPhone 3GS 2G Firmware 3.1.2 on Windows”

  1. Volker on October 16th, 2009 7:03 pm

    would be great, if it would work, but it doesn’t.
    The unlock does not work, because of the baseband change withe the new FW 3.1.2….

  2. Raj on October 16th, 2009 7:05 pm

    @Volker

    No this will not upgrade your baseband.

  3. Klaus on October 16th, 2009 7:35 pm

    I have a iphone 3gs with firmware 3.0, jailbreaked with ultrasnow and use a o2 simcard.

    can i use this guide to update the firmware to 3.1.2 and use my simcard in future ?

    must i use a activated custom firmware or an unactivated firmware ?

  4. Klaus on October 16th, 2009 8:12 pm

    i have followed your guide, it runs perfectly :-)

    I´m so happy, u are great !!!

  5. Raj on October 16th, 2009 8:16 pm

    @Klaus

    Welcome to the 3GS 3.1.2 World

  6. justice on October 17th, 2009 12:47 am

    Raj……. this jailbreak…will it work for 3g?

  7. Raj on October 17th, 2009 7:48 am

    @justice

    No, this one only for 3GS users

  8. Marty on October 17th, 2009 12:24 pm

    Will it unlock my 3gs already jailbroken with 3.1.2 but my baseband is 05.11.08? Please advise.

  9. Ryan on October 17th, 2009 2:06 pm

    Well, i also have the problem that update the new iTunes and it is locked my cell phone since i don’t use AT&T. I followed your step, downloaded the file only; however, after i install the file that i have downloaded above, i cant continue sine the iTunes said that unknown error 1604
    what is it and how can i solve it?

  10. boswinkel on October 17th, 2009 2:33 pm

    Raj. thank you for your work.

    my iphone was 3.0 with o2-network lock, then there was an upgrade to 3.1…i had all acces to the phone, except for sim. now i have upgrade to 3.1.2 from itunes original and can do only Emergency calls. its baseband 05-11-07…will these steps works also on my iphone and solve the problem?

    pls reply in normal language, i dont understand very much of iphones.

    thank you.

  11. Souf on October 17th, 2009 6:11 pm

    i have 3Gs 3.1.2 and i done everything, but unlock didn`t work my Modem v.05.11.07 is that the reson for couldn`t unlock.
    please any idea.

  12. Klaus on October 17th, 2009 6:36 pm

    I have a question: i have follwed aour guide and everything works fine. But i cant sync apps which require fw 3.1 for example the game “canabalt” i have jb and appsync 3.1 installed.

    Klaus

  13. Raj on October 17th, 2009 7:41 pm

    @Souf

    Yes. Coz you are on v.05.11.07

  14. Ejaz on October 17th, 2009 10:20 pm

    RAJ well i highly appriciate your hardwork … I have a Question for you.

    My 3gs was locked due to official update 3.1 .. its been 1 month my cell is locked … now if i restore with this 3.1.2 will my phone be some stable as in a ipod ? i mean i know till now no baseband unlock for 5.11.07 but … can i restore my locked iphone with this firmware in inorder to use wifi , cydia , games and songs ? inshort an ipod for the time being ??

    waiting for you reply.

  15. sergei on October 18th, 2009 3:05 am

    raj, quick question.

    If I get a warranty replacement for my 3g with 3.1 firmware on it, can it be unlocked using this method?

  16. Raj on October 18th, 2009 7:45 am

    @Ejaz

    No Ejaz you can,t

  17. Dan on October 18th, 2009 1:46 pm

    Hi, I have iphone 3gs and am trying from a long to JB it, its done, Blackr!n and then Cydia, all ok but when I put my spanish sim, then its just says ” searching” and that never ends, It was JB before the 3.1.2 but now I am just lost,
    plzzzzzzzz HELPPPPPPPPP

  18. veljko on October 18th, 2009 2:30 pm

    i get a unknown error 1604 . what can i do to make it wrok? pleas answer

  19. Tejpal on October 18th, 2009 9:57 pm

    hi today i update my iphone ( 32 GB S), via Itune, now my phone firmwire 3.1.2,when it is finished, i see my my has lock, can u tel me how i can unlock my, if anybody can help me pls pls pls pls pls Help me

  20. icebeq on October 19th, 2009 9:34 am

    I already done all these steps, however my phone keep searching the network (No Service)
    Already swap the sim card, restarted d phone, on / off the network setting n etc.
    Still No netwrok~
    Pls help!!

  21. Mcbren on October 19th, 2009 11:39 am

    If I haven’t jailbroken my new 3GS should I not try use this?

  22. Renas on October 19th, 2009 3:43 pm

    @ Raj
    Hello, is it installing Cydia with this ipsw? I mean how can you Unlock if there is no Cydia program installed?

  23. Raj on October 19th, 2009 3:46 pm

    @Renas

    Yes it was with Cydia.

    After the installation you have to run Cydia to Unlock it

  24. Renas on October 19th, 2009 4:12 pm

    @Raj

    Do you know anything about the error 1604? I got that error 3 times in row any ideas?

  25. Raj on October 19th, 2009 4:14 pm

    @Renas

    Install the latest iTunses Version. Restart your PC and Iphone than do it. It works

  26. James on October 20th, 2009 5:12 am

    I installed iTunes 9.0.1.8., plugged in the iPhone, did a backup, then did the Shift + Restore pointing the custom ipsw. I then performed the upgrade as instructed on a iPhone 3GS 3.01 firmware with baseband 4.26.08 (jailbroken) and it worked perfectly. I know have 3.12 firmware with baseband 4.26.08 (jailbroken) and unlocked with ultrasn0w. It worked perfectly.

  27. geda on October 20th, 2009 9:46 am

    i have a new iphone 3.1 basband 5,11 and can i jail break it in the windows . do i have to updat it or i will not unlock its new in the box came with 3.1

  28. Jignesh Patel on October 20th, 2009 5:27 pm

    By mistakly update from 3.0 to 3.1 via itunes, now i m stuck with 3.1, can i upgrade to 3.1.2 will this will allow me to use other sim card.

    thanks

  29. alex on October 21st, 2009 3:07 am

    mine is 3GS (3.1.2) with baseband 5.11.07. I tried the steps and got 1604 error. Any clue? Thanks

  30. Arun on October 21st, 2009 11:42 am

    I installed iTunes 9.0.1.8., plugged in the iPhone, did a backup, then did the Shift + Restore pointing the custom ipsw. I then performed the upgrade as instructed on a 3.12 firmware with baseband 5.11.07 and unlocked with ultrasn0w. Its Not worked still searching and finally Say No Service, Please Help to activate my iphone 3gs to india sim cards, please help me

  31. Raj on October 21st, 2009 11:45 am

    @Arun

    This Will not work on 5.11.07 baseband. and already mention it does not work for those who have an iPhone 3GS with Firmware 3.1 out-of-the-box.

  32. Raj on October 21st, 2009 11:45 am

    @geda

    No You Can,t

  33. Raj on October 21st, 2009 11:46 am

    @alex

    It will not work on baseband 5.11.07

  34. Arun on October 21st, 2009 3:05 pm

    thanks for ur replay , how to change my iphone 3gs
    baseband

  35. madhu on October 21st, 2009 8:39 pm

    iphone 3gs 3.1 succesfully jail bracked but not unlocked please help me

  36. Shone on October 22nd, 2009 12:53 am

    Thank you SOOO MUCH :) WORKS LIKE A DREAM :)

  37. Kalinkamina on October 22nd, 2009 8:18 pm

    Well it sounds easy and it is easy, but after unlocking I can’t find any network :S

  38. yasser khalid on October 23rd, 2009 2:38 pm

    I have a 3G 3.0 firmware with baseband 4.26.08.

    I want to go to 3.2.1 but keep baseband 4.26.08.

    Do you have
    iPhone1_2_3.1.2_7D11_Activated_Custom_Restore

    as this post only has for 3GS and 2G.

    Please can you direct me to a link to obtain this. or can you create for me.

  39. Vikas on October 24th, 2009 12:49 pm

    I have a factory unlocked iphone 3gs model no mc 131x modem firmware 05.11.07. tried jailbreaking using blackra1n but errors were there and later came to know that blackra1n does not work for MC models. i am on firmware 3.1.2 updated after blackra1n issue. Now which custom firmware do i download and restore to and will it work…

  40. Lasqoqo30 on October 25th, 2009 2:52 pm

    Where on earth can we get the Jailbreak that works with 3G? I’m with Orange Cameroon I have done all these biut I still get ‘No Service’.

  41. Anand on October 26th, 2009 9:59 pm

    I Jailbroke my iphone 3gs @ 3.0 it worked fine including network;; i updated to 3.1 thru itunes ;;;; i m locked now ;;;can i try your guide;;;;;;Please help will there be an unlock for baseband 5.0…. in the future ??? it cost me 44000 inr;;;;

  42. Aditya on October 27th, 2009 11:53 am

    Hi how can i get this done for a 2g on windows
    Can you please help

  43. bug3000 on October 27th, 2009 6:40 pm

    i know its the custom firmware, i just want to know, other firmwares have the silly pineapple at boot, does this one have it?

  44. akilles on October 29th, 2009 8:08 pm

    Hi i did this to my iPhone 3G it came with OS 3.0.1 out of the box i did the jailbreak to 3.1.2 baseband is 4.26.08 but when I installed ultrasn0w It didn’t worked for me it says searching for a long time and then just goes to No Service it seems like a straightforward and easy method I don’t know what went wrong any suggestions?

  45. Bako on October 31st, 2009 7:34 pm

    U R The 1!!!!!
    Thanks alot man it Works!
    i was using AT&T Unlocked 32 gb 3GS
    with a 3.0 firmware & 4.26.08 modem,
    i just followed what u explained and everthing is working fine.
    I unlocked it with no problem and i can still use
    my turkish simcard and my modem firmware is
    still the same.
    Thanks again

  46. enal on November 3rd, 2009 2:23 pm

    I have an iPhone 3GS that is already Factory Unlocked.
    (I bought it from SingTel. The Singapore government’s rule that all iPhone sold in Singapore must be factory unlocked)

    It is now in 3.0 firmware, If in the future I want to upgrade it to 3.1, will it affect the Factory Unlock?? since they said that the baseband will permanently changed. (because I’m using another simcard -not from singtel-)

    Or the upgrade just will affect the iPhone that with Software Unlock (not Factory Unlock)

    Thank you for your helpful information!

  47. shinbo on November 9th, 2009 10:45 pm

    You guys gotta stop using rapidshare… its a piece of shit and now only premium members can download it.

Trackbacks

  1. Munna™
  2. Unlock iPhone 3GS Firmware 3.1 on Windows | TechnoBuzz.net
  3. RAHUL
  4. FW 3.x: Jailbreak + Unlock Windows? - iPhone Forum - alles over de Apple iPhone, iPhone 3G en iPhone 3GS
  5. FW 3.x: Jailbreak + Unlock Windows? - Pagina 2 - iPhone Forum - alles over de Apple iPhone, iPhone 3G en iPhone 3GS
  6. Acktivated Firmware for iPhone 2G 3GS OS 3.1.2 | ToTheMobile.com