Install Official TWRP on Redmi Note 3. Yes the official TWRP is now available for the Xiaomi Redmi Note 3 users. TWRP recovery is always useful to flash zip file and root the Redmi Note 3. Now the official version of TWRP recovery is available, so here in this tutorial, we will show you how to install Official TWRP on Redmi Note 3. The process is simple and all you need a TWRP image file and ADB files to flash the same on your Redmi Note 3 Android phone. Once the TWRP is installed, you can easily get the root access on your phone by flashing some zip files. We tested the below mention method on our phone and successfully flashed the TWRP and got the root access on the phone. Here you can learn how to do that same and very soon we are going to post an another guide to Root the Redmi Note 3 with the help of TWRP.
The guide is only for the Redmi Note 3 users and don’t follow this method on any other Xiaomi phones. Before following this method do take the full backup of your phone and read all the instruction very carefully. Warning: Tecnobuzz.net is not responsible for any damage that might happen to your phone during this process.
Table of Contents
Things you need to install TWRP on Redmi Note 3
- A Redmi 3 device with unlocked bootloader.
- Download TWRP For here and Rename the File to TWRP.img
- Battery Above 60%
- Install ADB and Fastboot file here. Now you will see the ADB folder on your Computers C Drive (C:/ADB).
Steps to Install Official TWRP on Redmi Note 3
Step 1. Once the TWRP file is downloaded and renamed to TWRP.img file. Move the File to the ADB folder that you created above during the installation of ADB files.
Step 2. Now open the ADB folder and opened the command terminal window. To do this shift + right click anywhere within that folder, select open command prompt here.
Step 3. Now boot your Phone in Fastboot mode. To do this First Turn off your phone and wait for few seconds and then Press Volume Down (-) and Power buttons simultaneously. Release the buttons once you’ve seen Fastboot logo.
Step 4. Connect your phone to your PC using its USB cable.
Step 5. Now type this command to see if your device has been connected properly and recognized by your computer.
You will see a number on the screen with fastboot.
Step 6. Now to flash the TWRP recovery on your phone. Enter the following command to flash the TWRP on your phone.
fastboot flash recovery TWRP.img
Step 7. Now the TWRP recovery is successfully installed on your Redmi Note. Now to boot your TWRP screen. Run the following command.
fastboot boot TWRP.img
Step 8. Now your phone will then reboot automatically into recovery mode, and TWRP interface will be displayed.
That’s it. Now the Official TWRP is successfully installed on your Redmi 3. Enjoy!